A brief tutorial on making a Masking Tape Pattern
Masking Tape Pattern 6
Assemble and decorate puppet
Masking Tape Pattern 3
Cover in a layer of masking tape
Masking Tape Pattern 4
Cut the tape/tinfoil layer off where you believe a good place for a center seam should be (top). Cut wedges into the shaped piece so the pattern lies flat. (bottom). Do not cut away any parts of the pattern or you will have to re-add them later.
Masking Tape Pattern 5
Transfer the pattern to your foam
Masking Tape Pattern 2
Use a layer or two of tin foil to get a closer shape. You don't want thick layers of tinfoil as it will be the backing of your end pattern.
Masking Tape Pattern 1
Wad paper up into the general shape you want
Powered by SMF 1.1.21 |
SMF © 2015, Simple Machines
Copyright © 2000-2018 Puppets And Stuff, All Rights Reserved
Page created in 0.088 seconds with 11 queries.