Puppets and Stuff
Pages: 1 2 [3]   Go Down
Building a mouth assembly  (Read 37806 times)
Shawn Sorrell
« Reply #30 on: March 18, 2012, 07:02:13 am »

Yep one of my favorite songs and scenes.
Rikka
No Avatar
« Reply #31 on: March 18, 2012, 07:18:55 am »

I like it when the girl turned blue(berry).
gbutler288
No Avatar
« Reply #32 on: June 19, 2012, 12:09:47 pm »

was there ever a pictorial on how he built those mouths with leather?
Desipio
« Reply #33 on: February 08, 2013, 03:38:52 pm »

Just a thought... Been flicking through a few threads. On some joints but mainly the mouth to add flexibility I find the plastic rings from holding beer cans together REALLY reliable.

top picture - http://emusingthings.com/2012/04/05/dangerous-disposable-devices/
Shawn Sorrell
« Reply #34 on: February 09, 2013, 08:16:16 am »

Callum.... Makes a lot of sense.... how do you actually use them.  I can kind of understand since they seem impossible to tear apart when I do have to throw them in the trash. Smiley Better that they be used on a puppet then end up tangled in sea life.
Desipio
« Reply #35 on: February 10, 2013, 03:42:44 am »

The way I was shown how to make a mouth piece was two separate pieces of card... with tat in-between. then coated in Denim, then with rest of jeans I use either to belt loops or the hard seam pieces for the finger loops.
Shawn Sorrell
« Reply #36 on: February 10, 2013, 07:33:33 am »

I get they are used as the hinge.  Yes very clever.
PuppetBakery
« Reply #37 on: April 10, 2013, 05:40:56 pm »

Wait ... what? I want to learn more about plastic pop can holders. I think I've got the general idea but lacking some details. SO - plastic rings go between layers of denim and plastic/card/etc. This serves as a mouthplate hinge, right? And the rest of the jeans can be used for finger tubes/holders?
MsPuppet
« Reply #38 on: April 11, 2013, 08:38:43 pm »

I recently dismantled an old puppet I purchased.  The mouth board was... vinyl floor tile! The kind you peel the back off of and stick down.  Not sure it is what I would use (I prefer Sintra or a similar plastic), but it worked. The mouth plate was also sewn to the mouth fabric.  All I can figure is they must have used an industrial sewing machine and an ultra heavy duty needle to get through that stuff. Anyone ever used this material or have tips for sewing through something like that?
Shawn Sorrell
« Reply #39 on: April 12, 2013, 08:12:43 am »

Wow... floor tiles! Guess it could work but in my experience, they tend to crack really easy. Not talking in puppet use but when I've used them for floors. Smiley  A good home machine and number 16 needle could very well get through them ok I would think. You would want a universal or chisel point. I've sewn through similar thicknesses of other odd materials before with that set up. The only thing is I would not go with the self adhesive tiles if you want to try this. Just like that sticky back Velcro, the adhesive is going to gum up your needle in about an inch of sewing and you'll be sorry! Wink
MsPuppet
« Reply #40 on: April 12, 2013, 10:58:03 pm »

This was not the really hard tiles, almost more like a linoleum type.  A very old puppet, so I guess it was preserved well.
pagestep007
« Reply #41 on: April 13, 2013, 05:49:22 pm »

I have seen the flexible linoleum type vinyl used. The old linoleum tiles we used for printing blocks in art classes and they did crack if you bent them. The newer vinyl seems ok , and can be sewn into the mouth. It gives a flexible mouth. I prefer something a little more solid though, like card.
Desipio
« Reply #42 on: April 19, 2013, 01:32:11 pm »

PuppetBakery have just seen your post regarding the plastic can holders. I personally cut them up using strips of it as the hinge for the mouth piece. I've always done a top piece and bottom piece hinged by the plastic. Does this make sense? Experiment.. It's very sturdy stuff.
PuppetBakery
« Reply #43 on: April 24, 2013, 08:06:27 pm »

Desipio - yes, you make sense. I just got a hold of some of those nifty rings and plan on abusing them thoroughly over the weekend. Thanks for the tip!
Puppet_Dude
« Reply #44 on: March 23, 2017, 07:26:07 pm »

I go to lowes and get their free samples to make some of my mouths with.
Pages: 1 2 [3]   Go Up

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines

Copyright © 2000-2017 Puppets And Stuff, All Rights Reserved

Privacy Policy - Terms of Service

Page created in 0.133 seconds with 25 queries.

Puppets and Stuff