Puppets and Stuff
Pages: 1 ... 11 12 [13] 14 15 16   Go Down
3D-printed puppet parts  (Read 84634 times)
Tioh
« Reply #180 on: December 21, 2015, 12:34:03 pm »



I made this new model specifically for Selective Laser Sintering (SLS) 3d-printers. The shape is similar to the head-base of my skunk puppet. The lower jaw was made specifically for this head.

I uploaded the models to Shapeways - my percentage is 0 (I can't make it any cheaper).
Head: http://shpws.me/Lb3t
Lower jaw: http://shpws.me/Lb3w
« Last Edit: July 07, 2017, 09:50:13 am by Tioh »
Tioh
« Reply #181 on: January 25, 2016, 01:38:08 pm »

Here's a new model for a racoon head. I did not make a model for the back of the head, nose and ears.

You can get the model at Thingiverse: http://www.thingiverse.com/thing:1293161
« Last Edit: July 07, 2017, 09:50:42 am by Tioh »
Tioh
« Reply #182 on: January 31, 2016, 08:12:34 am »

I changed the racoon head-base a bit and uploaded the second version to http://www.thingiverse.com/thing:1293161
The new model has smaller eyebrows and a relocated jaw hinge. Holes were added to make it easier to attach the fur by glueing or sewing.
« Last Edit: July 07, 2017, 09:51:14 am by Tioh »
Tioh
« Reply #183 on: February 13, 2016, 02:41:22 am »

I made a second version of the bear head-base - an ice bear:

http://www.thingiverse.com/thing:1340399

Someone requested a cute round head with big eyeholes and a shorter snout:

http://www.thingiverse.com/thing:1331920
« Last Edit: July 07, 2017, 09:51:39 am by Tioh »
Tioh
« Reply #184 on: February 14, 2016, 03:42:52 pm »

A new bird puppet head:




Surfaces for the hands of the puppeteer were added in this model. http://www.thingiverse.com/thing:1342335
« Last Edit: July 07, 2017, 09:52:12 am by Tioh »
Tioh
« Reply #185 on: February 21, 2016, 10:15:41 am »

I made a head-base for a pig:


« Last Edit: July 07, 2017, 09:52:37 am by Tioh »
Tioh
« Reply #186 on: February 21, 2016, 12:36:57 pm »

My new horse head-base:


« Last Edit: July 07, 2017, 09:53:05 am by Tioh »
Tioh
« Reply #187 on: February 27, 2016, 03:14:12 pm »

A cat puppet head-base:
« Last Edit: July 07, 2017, 09:53:30 am by Tioh »
Tioh
« Reply #188 on: February 28, 2016, 02:44:17 pm »

I uploaded the pig puppet head-base at Thingiverse http://www.thingiverse.com/thing:1377665
The model is sized for large hands.
« Last Edit: July 07, 2017, 09:53:58 am by Tioh »
Chris Arveson
« Reply #189 on: February 28, 2016, 08:03:13 pm »

Your work is very impressive, but they are just realistic enough to creep me out a bit.

Good work!
Tioh
« Reply #190 on: March 19, 2016, 03:56:18 am »

Somebody requested a Flamingo puppet head with the eyes not at the sides of the head

http://www.thingiverse.com/thing:1409145

I also released the 3d-model for my new cat puppet-head

http://www.thingiverse.com/thing:1426512
« Last Edit: July 07, 2017, 09:54:42 am by Tioh »
Tioh
« Reply #191 on: April 11, 2016, 03:40:37 pm »

The cat with fur (about 80% finished):
« Last Edit: July 07, 2017, 09:55:13 am by Tioh »
Tioh
« Reply #192 on: April 13, 2016, 01:05:11 pm »

A new 3d-model for a fox head ... yes, I like Zootopia
« Last Edit: July 07, 2017, 09:55:43 am by Tioh »
Tioh
« Reply #193 on: April 17, 2016, 10:47:37 am »

The finished cat puppet:

She's 110cm tall.
« Last Edit: July 07, 2017, 09:56:14 am by Tioh »
Shawn Sorrell
« Reply #194 on: April 18, 2016, 05:53:32 am »

Looks great!
Pages: 1 ... 11 12 [13] 14 15 16   Go Up

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines

Copyright © 2000-2017 Puppets And Stuff, All Rights Reserved

Privacy Policy - Terms of Service

Page created in 0.172 seconds with 24 queries.

Puppets and Stuff