Puppets and Stuff
Pages: 1 2 [3] 4 5 ... 17   Go Down
3D-printed puppet parts  (Read 142802 times)
Tioh
« Reply #30 on: January 19, 2014, 03:19:50 pm »

Nose added:

The version on the right is the same model sized to fit my head - a base for a costume.
« Last Edit: July 07, 2017, 09:01:10 am by Tioh »
TygerMin
« Reply #31 on: January 19, 2014, 03:21:44 pm »

That does it, I need a 3D printer.  Granted...need to learn how to model things first.
Na
No Avatar
« Reply #32 on: January 19, 2014, 07:22:44 pm »

whoa, that looks very cool. it does indeed make me want to buy a 3D printer Smiley
cathicks
« Reply #33 on: January 19, 2014, 08:49:04 pm »

This is fantastic, Tioh. Excellent model! Thank you for making it available to everyone.
Tioh
« Reply #34 on: January 25, 2014, 05:32:03 pm »

The first print of new model I made:

There was a small error in the lower jaw - I fixed that after the print was finished.
« Last Edit: July 07, 2017, 09:01:48 am by Tioh »
Tioh
« Reply #35 on: January 26, 2014, 11:09:52 am »


The inside of the mouth is made of felt and Wonderflex.
« Last Edit: July 07, 2017, 09:02:27 am by Tioh »
Shunaka
« Reply #36 on: January 26, 2014, 01:55:10 pm »

Nice work Tioh! What 3D program do you use to make the model?

Shunaka
Tioh
« Reply #37 on: January 27, 2014, 02:57:19 am »

Nice work Tioh! What 3D program do you use to make the model?

Shunaka

These were made with an old version of Lightwave Modeler - it did the job, but there are better programs for modeling organic looking structures. I think I'll switch to Sculptris (http://pixologic.com/sculptris/).
Tioh
« Reply #38 on: January 28, 2014, 03:21:11 pm »

This the second 3d-print of my wolf puppet head. The first print was a little bit to small. Sculpted in Lightwave Modeler  and printed in PLA on a Makerbot 1 dual in about 8 hours. The parts were glued together with Plaast and MagicPlastic. The inside of the mouth and the ears are made of felt and wonderflex. The eyes are ping pong balls.

I sanded the eyelids, because I want to paint them.
« Last Edit: July 07, 2017, 09:03:06 am by Tioh »
Na
No Avatar
« Reply #39 on: January 28, 2014, 10:03:20 pm »

Is there something on the nose, like paint or something? Or is that just reflection off the camera?
Tioh
« Reply #40 on: January 29, 2014, 12:49:21 am »

Is there something on the nose, like paint or something? Or is that just reflection off the camera?
That's a reflection from my cameras flash.
Na
No Avatar
« Reply #41 on: January 29, 2014, 04:19:05 am »

Thanks, though disappointed it's not some new and interesting building technique Wink
Tioh
« Reply #42 on: February 15, 2014, 10:11:54 am »

I made a new NURBS-model, transformed it to polygons, extruded the model and cut everything off that I do not need:


This model was not made for a specific purpose, so I decided to release it for free.
It's now on Thingiverse: http://www.thingiverse.com/thing:250454
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

The head base can be used to build a puppet-, plushie-, robot- or even a costume head (you have to scale it). Fake fur can be glued on.
I did not include the lower jaw because It's faster (and cheaper) to make one with an aluminium profile when to print it.

Tioh_fursuithead7_onepart.stl is the complete model - I recommend printing the 3 parts. It can be printed without support material.
« Last Edit: July 07, 2017, 09:06:33 am by Tioh »
Shawn Sorrell
« Reply #43 on: February 15, 2014, 02:08:53 pm »

Sweet! I really wish I had a 3D printer.
Tioh
« Reply #44 on: February 15, 2014, 02:39:58 pm »

You do not need your own 3d-printer - there are hackspaces in many cities. http://hackerspaces.org/wiki/ - many of those have a 3d-printer.
Pages: 1 2 [3] 4 5 ... 17   Go Up

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines

Copyright © 2000-2018 Puppets And Stuff, All Rights Reserved

Privacy Policy - Terms of Service

Page created in 0.147 seconds with 24 queries.

Puppets and Stuff