AAAAHHHH!! HELP!!!! Posted by Sunbeatle Puppets on Sep 16, 2010
ok, so i was working on my puppet, doing the palm support with the finger wires and everything, which went well, but then i got out the wire I ordered on Amazon
http://www.amazon.com/Steel-Music-Straightened-Diameter-Length/dp/B00138937E/ref=cm_cr_pr_pb_t
and after about half an hour of trying everything and all sizes of pliers, shears, and even a hacksaw, i've figured out that it's impossible to cut!
so what do you guys cut your rods with? i'm really desperate any info would be absolutely wonderful!!
Re: AAAAHHHH!! HELP!!!! Posted by VampireWombat on Sep 16, 2010
Well, doing a quick look up says to use a cutting tool on a dremel. Apparently you can also use a triangle shaped file and go all away around it enough that you can break it. Hopefully that helps.
Re: AAAAHHHH!! HELP!!!! Posted by Sunbeatle Puppets on Sep 16, 2010
hmm, thanks, actually, i think i've got it figured out, i talked to a friend of mine who is a carpenter and kind of an expert on cutting stuff
thank you so much i really appreciate it!
Re: AAAAHHHH!! HELP!!!! Posted by Billy D. Fuller on Sep 16, 2010
Most people use bolt cutters.
Re: AAAAHHHH!! HELP!!!! Posted by DrPuppet on Sep 17, 2010
I agree with Billy thats what i use.
Re: AAAAHHHH!! HELP!!!! Posted by Sunbeatle Puppets on Sep 17, 2010
actually all it took was a hack saw and some vice grips, but thank you all so much!!