puppet rod trigger Posted by Mr. Magilwood on Apr 20, 2012
hey everyone I am trying to make an owl right now using a trigger for the mouth. Just wondering what is the best way of making a trigger? I think I am looking for a trigger that is similar to rizzo or pepe
Re: puppet rod trigger Posted by 1stage on Apr 20, 2012
Best way is to sketch it out and then mock it up using whatever materials you have.
For the moving box puppets for Avenue Q, I used a trigger mechanism that pulled down on an L-bracket that was bent out to 135 degrees. The trigger pulled down on a rocker that pulled UP on the back of the L bracket. The parts were prototyped with foam core, and then modeled in Google Sketchup and sent to Shapeways for 3D printing. I used ABS the first version, but it broke easily. I later went with nylon, which was less expensive and was much more solid.
Moving Box Mouth
If you sketch out what you're trying to do and shoot me an email, I'd be glad to help.
- Sean
For the moving box puppets for Avenue Q, I used a trigger mechanism that pulled down on an L-bracket that was bent out to 135 degrees. The trigger pulled down on a rocker that pulled UP on the back of the L bracket. The parts were prototyped with foam core, and then modeled in Google Sketchup and sent to Shapeways for 3D printing. I used ABS the first version, but it broke easily. I later went with nylon, which was less expensive and was much more solid.
Moving Box Mouth
If you sketch out what you're trying to do and shoot me an email, I'd be glad to help.
- Sean
Loading
No More Post
Error
Loading